Unbreakable Kenlin Rite Trak 1 Drawer Track - Improved Glide
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.52 – €0.63 net (excluding VAT)
For file: Armoire Drawer Slide - Case Part_0.4n_0.15mm_PETG_MINIIS_36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.58 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 36.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Improved Glide to replace Kenlin Rite Trak 1 hardware. This is the glide only! See original model for the guide.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 125
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
I remodeled the glide from the linked model. The original glide has a cutout and ramp to more easily allow the drawer to be installed. There's a bump in the track on the drawer that presses down on the glide. The ramp makes the drawer easy to install but prevents it from falling out easily.
When I printed the glide from the linked model that doesn't have the cutout and ramp, the bump on the drawer would get stuck in the hole where the screw goes and pushing the drawer in all the way would cause the glide to break.
Adding the ramp allowed the drawers to be installed much more easily and without breaking the glide.
I also took the liberty of cleaning things up a bit, adding some fillets and removing some artifacts. I used measurements from original hardware and from the linked model in my design, and it worked great in my armoire!
P.S. Sorry there's not a real picture I forgot to take one before installing them and I'm not printing another one just to take a picture of it and then throw it away!