3/8-24 Vertical Antenna PVC Mount Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3/8-24 vertical / ground plane antenna mount cap for one-inch Schedule 40 PVC. Designed for portable amateur radio…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
3/8-24 vertical / ground plane antenna mount cap for one-inch Schedule 40 PVC. Designed for portable amateur radio operation. The four tabs on the cap accept 6-32 hardware for ground radials. Four strips of aluminum were fabricated that attach to the tabs and electrically connect the four ground radials. A 3/8” terminal lug connects the coaxial center conductor to the vertical driven element; the coaxial braid terminates at the wing nut on one of the four cap tabs. The downward pull of the radials holds the cap in place. NOTE: For a more snug fit of the cap, reduce the print size by 1 percent.
Category: 3D Printing