1 / 6
Nexus Pro X Buffer Tube Extension
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stock-alike buffer tube extension for the Nexus Pro X
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 35
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stock-alike buffer tube extension for the Nexus Pro X, allowing for and extra 3 slots of length while allowing for two of the main buffer tubes slots to still be used. It is also compatible with precompression spring spacers for the Pro X.
Print in place at 0.2mm layer height, and then pop out the supports from the mating surface. Screw on the spring guide shaft and then slot on to the buffer tube and secure with the stock screw. I used an orange PET-G for this for layer adhesion given the spring weight this has to retain.
Have fun!