Garmin Striker 4 Ice Fishing Rig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A carrying rig for your Garmin Striker 4 Ice fishing set-up.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 24
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial
To complete this Fishing Rig you will need:
8x M4x6mm heat-serts
8x M4x16mm bolts
2x M3x16mm bolts
2x M3 nuts
The M3 hardware is for the two power wire wraps
I used button heads but pretty much anything will work.
You also need the original base and smaller screws that your striker spins in. You can find that HERE.
I printed the handle from Sunlu PLA (olive green) to test the design and will use these till they warp in the sun. The base and uprights are printed from Polymaker HT-PLA (black) because that's what I had loaded at the time.
I also modified a Dewalt battery adapter designed by Shop Therapy to mount vertically on the base.
Shop Therapy's Version and assembly instructions HERE
My Modified version used on my rig HERE
ENJOY and TIGHT LINES!!