1 / 1
Velduro Rogue Brake cable fixation pulg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secure the cable to the hole where the brake cable enters the down tube frame
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 25
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The length of the brake cable of the Velduro Rogue change as the suspension moves.
But I don't think it's good to have a brake cable in and out of the frame.
So I made a 3D cable plug that fixes the brake cable that goes into the downtube frame.
The brake cable also prevented interference with the crank arm.
Printed with 64D TPU.
Even if you don't necessarily use 64D TPU, it is recommended to use a more rigid TPU as much as possible.