cup stand for Breville Bambino Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
NOTE UPDATES MODEL 2.0
After testing for a bit I've made some improvements to the original model, the bottom lugs were not quite longe enough to truly lock the stand in place and there was a slight "wobble" when knocked. to alleviate this issue ive recessed the bottom layer so only the outer rim touches the coffee machine,
finally a cup stand for your Berville Bambino Plus coffee machine that allows you to use the steam wand without removing the cup-stand.
this cup-stand will fit a standard sized coffee cup with a naked portafilter
this cup-stand “locks” in place on the two holes in the base grate on the coffee machine, and still allows the steam temperature sensor to operate as intended.
this will need to be printed with supports, due to the two “lugs” on the underside that locate the cup-stand.
I used 10% 3D honeycomb infill