Well Calibrated Printer Overhang Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an overhang test for well calibrated printers - and starts at a steeper angle, where you don't waste filament!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
The first two photos show a 50-75 and a 55-80degree on my MK4(+) - the following is just the 50-75degree.
I wanted an overhang test for my MK4, after I put on an MK4S fan!
The numbered degrees on all the other overhang tests never turned out right and were annoying.
Also, the other tests I would see all started at a reduced angle, and I have never had a printer that has ANY issue with under 20 degree overhangs...
I made 3 versions, all with 25 degrees of test per print; 45-70degree - 50-75degree - 55-80degree, if you have any need or curiosity for a 40-65 or a 60-85 please leave a comment and I'd be happy to alter the design for you!!
Please post your makes and leave a review if you get a chance :)