1 / 8
Collection of 45mm x 45mm MiniTec T-slot extrusion parts — image 1
1 / 8

Collection of 45mm x 45mm MiniTec T-slot extrusion parts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parts to attach a stylus and a trim router to the end of MiniTec 45x45 extrusion

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
39
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

Parts to attach a stylus and a trim router to the end of MiniTec 45x45 extrusion

Instructions

I needed to mount a stylus and a router motor onto two arms made from MiniTec 45x45 T-slot extrusion. I printed these in PLA but ABS would work also. I used 0.5mm nozzle and 0.5 mm layer height with high infill to keep them rigid. Clean out the holes and tap the 45x45 mount where appropriate. It slides cleanly onto the MiniTec extrusion after I clean away the stringy bits. The hole in the middle of the circular plates allows for a 8mm bolt to hold the whole thing tightly. The holes around the perimeter of the circular plates allows you to index your tool and stylus at 0, 30, 45, 60 and 90 degrees.

Category: DIY

Tags