Ultra tiny props for High Speed Propeller Launcher
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.47 net (excluding VAT)
For file: minibigprop_PETG_30m21s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tiny props for Lukas Hannert's prop Launcher
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 0
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Standard Digital File License
I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231. I made the small version of his launcher(available as a print profile on the main page), and it has the standard launch spindle size, and wanted some smaller props for that standard size launch spindle. I also have kids, so i wanted some lower cost, faster printable options. two of these fit on the standard spindle, the extended spindle could launch 4.
these are also relatively safe for indoors, they fly much slower than the standard propellers. they can still get some pepper behind them if you try, so use caution.
all that being said, use at your own risk, do not use broken propellers, do not launch towards people or animals, and by downloading this file you are taking full responsibility for the inherent risks associated with hi-rpm, tiny bits of plastic flying around.
gcode is for a run of 5 in PETG