Netgear 8-Port Switch (GS308) wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.39 – €9.03 net (excluding VAT)
For file: NETGEAR 8-Port Gigabit Ethernet Switch GS308 (No Bumps)_8h43m_0.20mm_210C_PLA_ENDER3V2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.21 excluding VAT (range midpoint).
- Weight reported by the author
- 92 g
- Print time reported by the author
- 8.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
wall mount for a Netgear 8 Port Network Switch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I rewired my wired network and needed to mount the newly installed network switch in an entertainment panel. There are two versions of the holder but they're 99% the same.
The one for the panel mount has bumps in the back to match the shape of the cabinet. I used M4x12 screws and nuts to fit into the panel holes.
The second version is flat if you want to screw it directly into a wall or other flat object.
It can be printed without supports, just position the bottom side up.