Nanami - Jujutsu Kaisen (anime)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Standard Digital File License
This 3d model was generated using AI!🤖.
Only minor fixes were made using Blender’s Sculpt mode.
Rotated to avoid too many tree supports in the chin, automatic supports.
The print was tested on a P1S. If you feel that the tilt angle is too steep, you can try printing it without rotating the model, although this will generate many more supports on the lower area of the head (the chin). By rotating it, only the back of the head becomes more exposed when removing supports, and overall it is less noticeable and easier to work with during post-processing.
The total height of the model is 10 cm
Print Instructions
General Print Settings
Nozzle: 0.4 mm
Layer Height: 0.16 mm (Bambu High Quality profile)
Wall Loops / Perimeters: 2
Infill: 15% Gyroid
Material: PLA+
Support Settings
Support Type: Tree Support
Support Angle: 23°
Support Placement: On build plate only
Manual Supports: I always add manual support on the shoes,
All photos of the model are real and have not undergone any kind of editing other than the camera’s own processing (JPEG). Different angles are included to show the most accurate result possible.