Tacoma Bed Light Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blank panel that fits the OEM bed light hole. Mount anything you want or use it to route cables without drilling holes.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 13
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A perfectly dimensionally accurate blank that fits the Gen 3 hole in the bed, left for optional OEM lights. Snaps in exactly like the OEM blanking plate.
Open the blank in Fusion and modify it for whatever you need to do. I've included an example that I used to route cables into my bed without drilling holes (I included a slot in the tab, too -- so I can easily pry it out later).
Material:
Print in PETG so the tab is flexible enough to work properly.
If you want to use the example cable gland plate, I used these connectors.
Print Instructions:
I strongly recommend printing the part horizontally with supports. This ensures the layer lines are in the strongest position for the snapping tab.