1 / 4
Caliper Horizontal Mount for Honeycomb Wall (HSW)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple magnetic mount for calipers on the honeycomb wall.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A simple mount for digital calipers to be stored horizontally.
There are two hexes to print: One at the LCD screen, and another at the end. You'll need to print both as they hold on to the caliper at different heights to ensure it's horizontal.
This is made for my caliper, the Werka 6-inch so it may need a bit of tweaking for your particular model.
You'll need a 10x3mm and a 8x3mm round neodymium magnet, but they're easily adaptable for other sizes.
Due to the hooks you'll need to print these upright as in the STL.