AR-15 / M4 mag pouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Magazine Pouch for AR-15 / M4 pattern magazines. Integrates into universal molle clip ecosystem.
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 87
- Makes
- 0
- Views
- 742
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Since I didn’t find any design that quite did what I wanted, I made this.
In parallel, I designed the universal Molle clip which is used to mount the pouch. It can be found stand alone here, should you want to use it for your own designs.
Features
decently high walls, not ultra low height pouches
strong magazine retention
easy to mount & remove from Molle
decent flaring without being at risk of breaking
Hardware
In terms of hardware, each pouch will require:
4x heat set insert M4 , 4mm height
4x M4x6 low profile screw (head height no more than 2.3mm)
4x M4 washer
65cm of 3mm paracord
2x assembled Molle Clip
That’s indeed quite a lot and I’m working on a completely different design which will be a single print and use very little hardware. That’s still just a concept at the moment though.
The files for the Molle clip are no longer included to insure that you will always get the most up to date version from the clip's page.
For assembly, refer to the picture included.
If you have any feedback on the pouch, please leave it below. I’ll run them myself but any feedback will be helpful for a potential, future revision. The pouch was designed with airsoft in mind as has not been tested with real steel magazines. That said, it should work fine and I'd be happy if somebody tried it.
Feel free to write me a message or leave a comment if you have an issue or questios