1 / 3
Prusa Mini Base anti foot falling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Does your Prusa Mini base foot falls? Prevent it with this small 10g mod.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod needs to be inserted into the aluminium 3030 extrusion, so you need to remove the front plate.
It should fits with a bit of friction and block the feet by interference.
To remove it use a long M4 screw and pull, or push from the other side.
The stl is for the left feet, mirror it if you need.