1 / 1
Gridfinity Container for Pinecil
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a container made to hold Pine64's Pinecil. It is modelled based off of measurements of my Pinecil v1 and is intended to hold both the Pinecil and one tip. It has a footprint of 1x3 and a height of 3u.
I had success printing on my Bambu Lab P1S with a 0.4mm nozzle and 10% infill in PLA.
I have not tested compatibility with the Pinecil v2, however it is supposed to have the same external dimensions.