1 / 5
Monitor pole lamp clamp - Print In Place — image 1
1 / 5

Monitor pole lamp clamp - Print In Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Desk monitor pole clamp for lamp

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
91
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

I have a lamp as seen in the photo that comes with a desk mounted clamp. The height puts the lamp right in the eye line and makes it quite unpleasant unless on its lowest power setting.

So, come with me while we take a trip through freecad.

These clamps will need a 6mm nut and bolt. I used a threaded screw and a nut but you do you. I would suggest you make sure the screw has a flat flange, no countersinks here. They fit the 36mm vesa pole, a small spacer would help if you have a smaller diameter pole.

If you would like a different diameter pole clamp or a different fitting i can knock one up quickly, just let me know.


FYI, the oval shape:

23.5 x 15 OD (Brace)
22 x 12 ID (Base)


This was printed on an ender 3.

Oh yeah, i almost forgot, these are print in place. I have set up a general 3mf with each part assembled. They print very cleanly on my printer, didnt even need to work the hinge at all which ive had to do in the past on some prints ive downloaded.

PETG Basic.
Nozzle: 0.4
Layer: 0.2 first 0.25
Infil: Honeycomb, no less that 10% is my recommedation.
Walls: 3

These lamps are not heavy, but you will probably want to flex the stem or adjust the light arms so youll probably want 3 or more on walls.

All in all, go for what you feel fits, they are quite sturdy.

Tags