GS75 Lifter for better cooling and tilted keyboard
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.41 – €1.72 net (excluding VAT)
For file: gs75_lifter_02mm_petg_mk3s_1h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.56 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.56 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A easy model I created to lift my MSI GS75 for better cooling and typing experience, it's designed to have a slightly…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 0
- Views
- 585
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A easy model I created to lift my MSI GS75 for better cooling and typing experience, it's designed to have a slightly tight fitting so it won't easily fall out.
Print instructions
Because of the high temperature it might have to handle, it's recommended to print with PETG
In the Gcode I set the seam position to Rear due to my personal preference, you can change it if you download the .3mf file I provided.