1 / 2
Tabletop vertical stand for Mercusys MS105G
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vertical stand for the Mercusys MS105G gigabit switch. Now with a hole for the power LED.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a vertical stand for the Mercusys MS105G network switch. One of the models has a 45mm wide base for a smaller footprint, and works better if attached to the surface using double sided foam tape. The other has a 60mm wide base and can be used without any adhesive. I printed it with 1mm walls and 2mm base and ceiling thickness. 30% grid infill seems to be enough, but if you want to further reinforce it, offset the infill pattern to better support where the feet and keyhole slots make the side wall thinner.