1 / 2
RX7 FD3S Glove Box Mouting Tab
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fix if your glove box hinge mount, there must be some of the original tab left. Epoxy in place.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
My glove box hinge mount broke, here is a replacement part that can be epoxied in place. There must be some of the original tab left to mount this to. In the above photo part of the original tab sits behind the printed part. The stand offs on the holes are to account for the offset. This is for the right side, I would imagine the left side could be used if mirrored. Orientation should be flat since the bolts will compress it. I do suggest using ABS or ASA. In my use case I used ASA-CF.