1 / 1
JBL Tune 720BT & 710BT Headband Replacement / Fix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM:
M2 nuts -- 4pcs
M2 bolts 6mm or 8mm -- 4pcs
TPU 95a for parts 3, 4, 5
≤10mm wide double-sided tape for part 5 (or glue)
Description:
1-adapter-capra-jbl:
Print with a 0.1 mm layer height (0.2 mm for the first layer is fine).
Pause at a height of 2.9 mm to insert the M2 nuts.
2-adjustment-arm-capra-jbl:
I recommend pausing at 8.8 mm (or 9 mm if printing with a 0.2 mm layer height) to manually paint the support interface layer with a felt-tip pen.
Model origin: