Pottery Wheel 10mm Base Standoff Setter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set 10mm Dimension for the base thickness of wheel throwing pots
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
A tool for setting a 10mm base standoff on pottery wheel thrown pots, designed for printing flat to achieve superior layer strength. Suitable for up to 190mm diameter With outer dimensions of 240mm and 120mm height. The base is set prior to pulling walls so the short legs accommodate this. Printed with a brim to stop the (thinnish length) edges from lifting. I used ESun PetG with a 0.6mm nozzle on a Prusa i3 MK3.
For those astute enough to notice, the photos are of a 16mm standoff because I throw on a 6mm high raised bat system. Rest assured the uploaded model file is a 10mm standoff
Inspired by all the three prong base thickness setters out there that should be designed for printing flat.