1 / 2
Polydryer Front Desiccant Cover 1.2mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ventilated front cover with a small gap
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 2
- Views
- 193
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The slots were reduced to 1.2mm so that smaller desiccant, including 3A molecular sieve can be used. This design is optimized for a 0.4mm nozzle. Use arachne slicing.
I printed it in PC, but PETG, PCTG, HIPS, ABS, or ASA would be good alternatives. You may need to adjust for shrinkage depending on your filament and if you printed it in a heated chamber.
It works for the stock front desiccant holder as well as this one with more air holes (the 2nd image I show)