Ploopy Classic 2 BTU mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top shell for revision K of the Ploopy Classic 2 trackball with BTUs instead of roller bearings.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 1
- Views
- 112
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Mod to replace the roller bearings with BTUs on the Ploopy Classic 2.
The compatible BTUs are the BOSCH Rexroth R053010810 KU-B8-OFK (available on keycapsss.com if you're in the EU) or, alternatively, the CY-8H from Aliexpress.
You can find the link to the original unmodded Ploopy Classic 2 repository here
The printing instructions are the same as the original.
You can buy the Rexroth BTUs from:
EU:
US:
This is just the top shell for revision K of the Ploopy Classic 2.
Since Printables doesn't provide the licence Ploopy uses, I will do what galatic did at their mod.
To quote, bomtarnes, “Note that the ploopy files are originally licensed under CERN-OHL-S which prusaprinters does not support; I have chosen what I believe to be an appropriate license.” I have included a STEP file.