Dragonburner Mounting Plate for Anycubic i3 Mega S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting Plate to attach Dragonburner toolhead to the Anycubic i3 Mega S.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Re-uses one of the bearing holders as well as bolts, bottom bearing holder is replaced with printed part that doubles as belt mount.
Belts mounted using Apex Clips https://github.com/ApexArray/ApexClips
Dragonburner https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
Uses
8x M4x10 screws from original bearing blocks
4x M4x4x6 Heatset inserts
2x M3x12 screws to attach to the ducts
2x M3x35 screws main mounting point
2x M3 heatset inserts, current design is for M3x4x4.2 because that's what I had on hand. Model will need some modification for the voron standard inserts.
You will most likely need a mod for belt tensioning on the X-axis.
ToDo:
a way to attach wiring cleanly
finish building to actually test it