1 / 9
Epilogue Reliquary :Kingdom Come: Deliverance 2 :Philips OneBlade 360 — image 1
1 / 9

Epilogue Reliquary :Kingdom Come: Deliverance 2 :Philips OneBlade 360

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Every journey ends, and returning from glory to ordinary life brings quiet sadness. This reliquary carries that triumph

Rating
0 / 5
Likes
5
Downloads
6
Makes
0
Views
131
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Every journey finds its end.
The moment we step away from days of triumph and return to the ordinary carries a certain, unspoken melancholy.

This piece is meant to bring a fragment of that glory into daily life.

A special box for those who have completed KCD2.
Designed for the OneBlade 360.

The model consists of four main components:

  • Lid frame

  • Lid relief panel

  • Main body

  • Inner compartment

  • Fully concealed hinge system

The hinge mechanism is structurally integrated and hidden from external view, maintaining a continuous silhouette while ensuring durability.

The lid is divided into a structural frame and a decorative relief panel.
The relief panel is attached to the frame using adhesive.

For optimal surface quality, both the lid relief and the inner compartment must be printed at a 45° angle.
Custom support structures are included in the files to ensure clean overhang performance and proper detail preservation.

Despite its monumental appearance, the model is optimized for practical FDM printing and requires minimal hardware.


Required hardware

  • 1 × M3 × 40 mm hex bolt

  • 4 × Ø3 × 6 mm neodymium magnets


Assembly Instructions

Step 1 – Confirm parts

Ensure all printed components are present:

  • Main body (bottom section)

  • Inner compartment

  • Lid

  • Hinge components (left/right differentiated)

  • 1 × M3 × 40 mm hex bolt

  • 4 × Ø3 × 6 mm neodymium magnets

Trim and sand any remaining support marks or burrs to ensure clean fitting surfaces before assembly.


Step 2 – Assemble the hinge

Insert the M3 × 40 mm bolt through the hinge opening from the designated side.
Tighten until it reaches the internal stop.

Do not overtighten, as this may restrict hinge movement.


Step 3 – Install the lid hinge

Insert the shorter hinge element into the lid guide channel and press firmly into place.

If printed in PLA, slight cracking may occur during insertion.
PETG, ABS, or ASA is recommended for improved durability.
If installed successfully, PLA should function adequately under normal use.


Step 4 – Install magnets

Press the Ø3 × 6 mm neodymium magnets into the main body first.

To ensure correct polarity for the lid magnets:

  1. Attach each lid magnet to the corresponding magnet already installed in the body.

  2. Close the lid gently.

  3. Press the magnets into their lid recesses while aligned.

This ensures correct polarity and secure closure.


Step 5 – Final assembly

Insert the inner compartment into the main body to complete the build.


Additional Note – Multi-color & File Information

This model uses multi-color geometry.
The provided OBJ file contains vertex color information.

Depending on your slicer, the appearance may differ or colors may not display correctly.
If your slicer does not support vertex colors, please use the provided 3MF files optimized for specific printers.


Recommended Filament

  • Black: Elegoo Matte PLA

  • Gold: CC3D Silk Gold PLA

These materials were used for the original prints and are recommended for achieving the intended visual contrast and finish.

Final Note

Separate 3MF files are provided for both the Snapmaker U1 and the Bambu Lab A1, each optimized for its respective printer.

This project was created as a tribute to those who have completed KCD2 — and wish to carry a fragment of that triumph into the everyday.

Tags