1 / 8
Thread Compass inspired by Boris Vallejo — image 1
1 / 8

Thread Compass inspired by Boris Vallejo

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Faden-Kompass inspiriert durch Boris Vallejo

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
302
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Faden-Kompass inspiriert durch Boris Vallejo

Auf einem Bild von Boris Vallejo (1983) sieht man eine neben einem Pegasus ähnlichem Pferd (mit Flügeln) kniende Frau die so vermute ich so einen am Faden befestigten “Eisenstein” Kompass benutzt.

Gesehen hier:

https://cp12.nevsepic.com.ua/62/1353959762-0440780-www.nevsepic.com.ua.jpg

Zur vervollständigung benötigt man einen Neodym-Magneten Durchmesser 6mm und 3mm hoch.

Dieser wird in die unten liegende Öffnung eingesetzt.

Wenn man danach einen dünnen Faden (am besten möglichst dünnes Nähgarn) ca. 30cm lang an der Öse befestigt sollte der Kompass je nach Einsetzrichtung des Magneten mit dem Kopf nach Norden b.z.w. Süden aus pendeln und somit die Richtung weisen.

Bei nicht-Gebrauch kann man das Teil als Kettenanhänger benutzen.

Viel Spaß :-)

--------------------------------------------------------------------

Google translates:

Thread Compass inspired by Boris Vallejo

In a picture by Boris Vallejo (1983) a woman is shown kneeling beside a Pegasus-like horse (with wings) who I suspect is using an 'ironstone' compass attached to a thread.

Seen here:

https://cp12.nevsepic.com.ua/62/1353959762-0440780-www.nevsepic.com.ua.
jpeg

To complete it, you need a neodymium magnet with a diameter of 6mm and a height of 3mm.

This is inserted into the opening below.

If you then attach a thin thread (preferably thin sewing thread) about 30cm long to the eyelet, the compass should point north or north depending on the direction in which the magnet is inserted.
Commuting from the south and thus pointing the way.

When not in use, you can use the part as a pendant.

Have fun :-)

Tags