Ring for Ice Watch watchband
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted to test TPU so print a ring to replace damaged one for my Ice Watch was a good opportunity for a 1st project
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 73
- Makes
- 0
- Views
- 499
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After replacing battery of my Ice Watch (see https://www.printables.com/model/134206-ice-watch-backcase-opener) I had to change the damaged ring of the watch band
I design the ring in Fusion 360 based on the original model and printed it with TPU filament on my Prusa MINI+
Filament used is Fillamentum Flexifill TPU 98A (One of the 2 references sold by Prusa).
There is a filament profile in PursaSlicer for this reference. So I used preset standard parameters in PrusaSlicer with 0.20mm layer height and textured plate without glue
I follow recommendations from Prusa site before loading filament (Cleaning, coldpull and loosen idler screw) and then launch print
Result is very good and ring is very flexible
On top of .stl and .3mf files I uploaded Fusion 360 .f3d one so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs