"AIRSUCK 2000" - A large radial fan for spray booths
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A re-upload of my thing from thingiverse with the most recent changes
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 204
- Makes
- 0
- Views
- 1,864
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
See an updated version at: https://www.printables.com/model/259313-airsuck-2000a-standardized-version-von-airsuck-200
Please note this disclaimer:
------------------------------------
This is a quite large fan with blades rotating at high speed! Act responsible, wear safety equipment and don't give it to small children to play with! I have warned you!**
Motivation: I was not really content with the built-in fan of my Wiltec spay booth (HS-E420DC) so i designed this large radial fan as a replacement.
The spray booth is also available from other resellers and looks like this: https://www.wiltec.de/airbrush-komplett-set-absauganlage-fur-farbnebel-mit-aussenluft.html
The pipe diameter of the fan inlet and of the outlet adapter is 100mm
The fan is designed for high airflow at an acceptable sound level.
For a successful build you need
- A large print bed which can print parts up to 201x224mm in size (i have used a Flsun Cube)
- A 775-type motor (e.g. "Jiang 775 DC 12-24 Volt ")
- A suitable power source with a rating of at least 5A at 12 Volt (this is what i measured with my specific motor)
- (optionally a motor speed controller)
- A motor coupling adapter with an outer diameter of 7.5mm, e.g.: https://www.conrad.at/de/messing-kupplungs-einsatzstueck-modelcraft-bohrungs-o-5-mm-o-x-l-13-mm-x-15-mm-226505.html
- Screws: 40 pcs. 3mm and 8 pcs. 4mm
Choose on of the 2 FAN options:
- "Large Radial Fan - FAN" is designed to be lightweight with maximum air intake.
- "Large Radial Fan - FAN EASY PRINT" is an alternative if your printer has problems with thin walls or stringing problems. Note however that you should take extra care to balance the fan for low vibration.
You may scale the fan down (i was able to successfully print it at 50%) but you need to use the motor mount as a template and create you own for your specific motor!
Just a hint: Using a motor controller enables you to adapt the speed of the fan. A device like this worked perfect for me: https://www.amazon.com/Motor-Speed-Control-Controller-10V-50V/dp/B01LZAXWCO/ref=sr_1_23?ie=UTF8&qid=1540932616&sr=8-23