Golf Ball Launcher & Putter - Transform any Old Golf Club
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn any shaft into a Golf Ball Thrower & Putter in one. Play 18 holes with just one club.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Golf Ball Thrower by easier.golf | ONE
Slide-On Putter by easier.golf | ONE
These are the official easier.golf | ONE 3D models.
With this system, you can transform any standard golf club shaft into a Golf Ball Launcher and Putter in one.
You will only need one club for 18 holes.
What You Get
Golf Ball Thrower (for distance shots)
Slide-On Putter (for precision on the green)
Print both parts.
Use the Golf Ball Thrower for long shots.
On the green, simply slide on the putter and finish the hole.
Material Recommendation
Print with PETG filament for best durability and performance.
PETG provides:
High impact resistance
Strong layer bonding
Better heat stability than PLA
Recommended:
High infill (80–100%)
Multiple perimeters for strength
Compatibility
Fits on every standard iron or driver shaft.
Installation
Cut off the old club face.
Slide the model onto the shaft.
Fix it securely using strong instant glue (e.g. cyanoacrylate).
Let it cure completely before use.
Done.
License
This model is released under a:
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
This means:
✅ Free to download
✅ Free to print
✅ Free for private use
❌ No resale
❌ No commercial use
❌ No modifications and redistribution
❌ No selling printed versions
Commercial licensing requests must be approved by easier.golf.
Safety Notice:
Use at your own risk. Do not use inside driving range boxes or enclosed hitting bays.
Always ask your golf club for permission before use.