Surfboard Fins (FCS, FCS2, Futures)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Surfboard fins for FCS, FCS2 and Futures fin boxes.
- Rating
- 4.909 / 5
- Likes
- 133
- Downloads
- 3,157
- Makes
- 12
- Views
- 10,351
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Used the original model as a baseline for the normal fins - thanks for the design!
(original model: https://www.thingiverse.com/thing:1324570)
Reduced the size to match the fins i already have and increased thickness, because they seemed a little thin.
The mini-fins were designed in blender based on an image i found online.
Same for the knubster center fin.
The side fins can be used right after printing without any post-processing.
For the center fins the model needs to be printed two times with the second version mirrored. The two halves need to be glued together after printing.
The model has 3 small holes - use 2mm long pieces of filament to align the two halves while gluing them together using super glue.
I printed and tested all fins.
Edit 2020-08-22: Added a shorter version of the fins
Edit 2020-09-06: Added mini fins
Edit 2020-10-25: Added knubster center fins
Edit 2021-08-08: Added mini center fins
Edit 2021-12-25: Updated fcs2 and futures tabs
Edit 2022-09-25: Added new river surfing fin model for weaker waves
Edit 2023-07-16: Added v2 of the river surfing fin model and a center fin model for the bigger fin
Edit 2025-02-07: Added futures fins with deep tab and 6 degree angle. The models without built-in support require support in the slicer.
Note: I haven't printed the ones with built-in support yet. If you do please let me know how they turned out or improvements are required
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
30%
Filament: Noname PLA
Notes:
Perimeters: 3
Top-/Bottom-Layers: 30
For the center fins i usually use 0.1mm layer height.