1 / 1
Pen shaped water shooter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The shooter is a pen-shaped syringe-style water shooter
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 71
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
The shooter can be assembled by supergluing a quarter-inch piece of silicone tubing over the plunger rod. grease is useful but not necessary. If grease is used, then apply it to the silicone ring and slide the plunger in and out of the chamber until it moves with little resistance(less is more). Print with PETG or PLA at 100 percent infil. use .12-layer height for waterproofing.