IKEA Symfonisk Sound Controller Holder for JUNG AS 500
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Integrate your IKEA Symfonisk Sound Controller into your JUNG AS 500 light switches.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing
Used PLA with smooth PEI plate for better surface finish
0.2 mm layers
0.4 mm nozzle
no supports
Still searching for a filament with matching white tone
Usage
In my case it works fine, without screwing the baseplate to the wall, as the frame is being held by another flush-mounted component. Use superglue to glue in a 1 Euro-Cent coin. This way the magnet inside the Symfonisk Controller holds it securely in place.
Both components should stick together without glue. The small inserts can help taking them apart again if needed.
Inspired by this model from @MichalBartak_152656