LayersFactory
Report model
1 / 1
Leopard HueForge — image 1

Leopard HueForge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Other Art & Designs
License
Standard Digital File License
DetailsMakes & commentsRemixesCollectionsRelated

  • Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

  • At profile is model size is 200 x 200 mm.

  • You can use raw .stl file 150x150 mm also.

  • Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. 

  • You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.24mm and the Actual Depth is 2.24mm

It is possible to print without material by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.

These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use. 

PLA Anycubic Black  Transmission Distance: 0.3
PLA Elegoo Basic White  Transmission Distance: 7
This print uses 2 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White for the rest

Tags

decorationcatwhiteanimaldecorblackwallart3darthueforgelepardpanter