1 / 3
2 AAA to AA Inline Battery Adapter, No Soldering
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapt two AAA batteries to replace two AA batteries Inline.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A tube that the outside diameter is the size of AA battery and slightly larger inside hole for the AAA battery. The thickness of the end is 4mm with a hole for a 3mm screw to be used for a contact. Depending on how tight the fit, use a single 8, 10 or 12mm long screw to change the overall length. Make sure the screw goes in far enough to contact the battery. In my case I had plenty of AAA NIMH batteries and no AA and this made good use of them. Basic print settings but suggest a good brim since it prints straight up so high.