MK4S Extruder Inlet Dust Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.05 – €0.06 net (excluding VAT)
For file: MK4S Extruder Inlet Dust Cover_0.4n_0.2mm_PLA_MK4S_3m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 2.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A dust cover for the extruder inlet.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A dust cover for the extruder inlet. A 3D printer will naturally get dusty. A dusty axis is not that big of a deal usually, and can be wiped down. And a dusty print bed is easily cleaned. But dust in the extruder will cause jams. I'm sure there must be a plastic dust cover that would cover the entire printer, but I have not found it and this will do for now.