1 / 2
NFHK Oculink 8i To PCI Express 4.0 x16 Adapter Test Jig — image 1
1 / 2

NFHK Oculink 8i To PCI Express 4.0 x16 Adapter Test Jig

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Alignment test for the NFHK Oculink 8i To PCI Express 4.0 x16 Adapter

Rating
0 / 5
Likes
1
Downloads
22
Makes
0
Views
316
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

Working with the Framework community to design a case/enclosure for eGPUs using the NFHK Oculink 8i To PCI Express 4.0 x16 Adapter from AliExpress/Amazon:

AliExpress: https://www.aliexpress.us/item/3256809000385961.html
Amazon: https://www.amazon.com/dp/B0BZKCJVLG

In the Oculink Expansion Bay Module thread, we're comparing dimensional variance of the NFHK Oculink adapter found at the links above. Data collected will be combined to create a common template for custom mounts for the board across versions/variants from NFHK (and accommodate simple variance between manufactured boards). We have already determined that at least 2 versions of the board are in the wild

Ultimately, the hope is for this relatively inexpensive eGPU board to be used as a common base with the Oculink x8 expansion board Filip developed for the Framework 16 laptop series as well as the upcoming Framework Oculink Dev Kit when it is released.

This model is intended to be dimension accurate - meaning it is best to print in PLA to avoid shrinking/etc. with other filament types. We have collected the data necessary, and as such I have no plans to change this model further; instead, I am working on designing the enclosure itself.

Tags