1 / 1
Lego Monorail Track Straight Short - 8 Studs Long - Inverted — image 1

Lego Monorail Track Straight Short - 8 Studs Long - Inverted

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lego Monorail Track Straight Short - 8 Studs Long - but printed in two stages for a neat underside and top surface

Rating
5 / 5
Likes
4
Downloads
36
Makes
0
Views
97
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a more experimental approach to printing monorail track, but this is still quite reliable.

The advantage of this approach is finer control over the top surface, no ugly supported underside and some saved filament.

You need to first print the "Main Body" part, you can print many of them at once or just one. It is important that you let the buildplate cool down completely on the printer to male sure the part does not warp. The choice of build surface decides the top surface of the final piece, make sure the first layer hight is correct for best results.

In a second step you need to print the "Rack" part but you need to add a pause to the print in the slicer at or just before 10 mm height, just before the rack starts printing. During that pause you need to press the "Main Body" part on the studs printed. Make sure to press it down all the way. after that resume the print.

Done

The small cylinder tube to the side is to purge after the pause and more importantly to make sure no collisions between the printhead and the previously printed main body happens.

Tags