1 / 5
Din rail case for STM32 Nucleo-64 Boards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for the STM32 Nucleo board, to make the development in the lab a little safer.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 582
- Makes
- 0
- Views
- 3,338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The spacing between the holes in the bottom is 18 mm.
There are three 2 mm holes for mounting the Nucleo board. You need mini screws like DIN 7981 2,2 mm x 6,5 mm. The holes in the bottom are 3.5 mm to comfortably fit M3 screws.
Other things you might enjoy:
- You can get the matching clip for the 35 mm DIN rail here: https://www.printables.com/model/161740-din-rail-clip
- And if you need a matching stand for the DIN rails on your lab bench you can find this here: https://www.printables.com/model/150786-din-rail-test-rack