1 / 11
Bird - 5 Star Carousel for budgies
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bird toy for budgies
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 5
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Each part can printed in PLA. Used 2 x M6 hot insert in the Main axle with a 30mm M6 bolt.
Used a FR4-2RS bearing that will fit very snug inside the Pentagon part. I used a small vise to squeeze it in tight the hole.
There is a 6mm spacer between the Main Axle and Pentagon part to allow it to spin freely.
The end cap is crazy glued to the bar stem. If you choose to print moving ball make sure to insert before gluing the other end to the Pentagon part
Designed for budgies but should be useful for other small birds like canaries or finches