1 / 30
Kingdom Come Deliverance II Philips One Blade Charging Dock — image 1
1 / 30

Kingdom Come Deliverance II Philips One Blade Charging Dock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

KCD-inspired Philips OneBlade wall mount with storage, charging dock & optional smart LED features.

Rating
0 / 5
Likes
4
Downloads
5
Makes
0
Views
59
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

KCD-Inspired Philips OneBlade Wall-Mounted Charging Station

Description

Wall-mounted charging station for various devices, including integrated storage solutions for accessories.

This upload is designed specifically for the Philips OneBlade, but you can easily create your own variation using the mounting holes in the lower section of the baseplate to make a custom phone charging dock. 

Important notice:
The uploaded files do not contain the Philips or KCD logos due to trademark restrictions, which I am not willing to violate. I have included a short guide explaining how to create your own logo cutouts using Blender.

Im still working on it and thus some files like the esp8266 source code and circuit diagram are still missing. Updates will be provided as soon as they are available.  

This project offers multiple optional build stages and upgrades:

  • Basic version: 3D-printed wall mount with holders and decorative elements

  • Advanced version: Add custom logos, backlighting and charging function 

  • Full version (“go bonkers” edition): Add a microcontroller (e.g., ESP8266), WS2812B LEDs, power monitoring, and charging status indication

All variations and required resources are included in the download folders.

Update - 05.03.2026 added pictures of the webui as well as the .ino for the ESP01 

Let’s begin — as usual — with some safety instructions. 

Safety Instructions

If you plan to build the fully electronic version:

  • Never leave a DIY PCB connected to a power source unattended.
    Many DIYers assume 5V low-power applications are harmless. I promise you: improper wiring can absolutely set your house on fire. 

  • Before first power-up:

    • Check for short circuits

    • Verify correct polarity

    • Measure all relevant voltages

  • When working with CA glue or contact adhesive, wear gloves to protect your skin.

  • During sanding and soldering:

    • Remove dust and fumes properly

    • Wear a suitable respirator mask

Safety first — always.

Credits to @ThorinOakenshield for the 3D model of the OneBlade — it was a huge help during the design process.

Bill of Materials (BOM)

3D Printed Parts
  • 1× Baseplate (full version for 300×300 mm printers)
    or split baseplate parts for smaller printers

  • 2× Decorative rings

  • 1× OneBlade holder

  • 1× Decorative upper arch

  • 1× Decorative lower arrow

  • n× Tool flat holders

  • n× Cable hooks

  • 6× Lower brackets

  • 1× Upper wall-mount bracket

  • 1× Mid bracket (with or without PCB standoffs)

Hardware
  • 30× M3 nuts

  • 30× M3x12 mm countersunk machine screws

  • 6× 3x16 mm wood screws

Optional electronics:
  • Perfboard

  • USB cable

  • ESP-01 (ESP8266)

  • INA219 current sensor

  • 3.3V voltage regulator

  • WS2812B LEDs

Consumables
  • CA glue or contact adhesive

  • Spray paint (primer + multiple colors)

  • Sandpaper

  • Acrylic paints

  • Paint brushes

  • Hotglue  

Build Description – Basic Version

Printing

Print all parts listed in the BOM.
If your printer has a 300×300 mm bed, print the baseplate in one piece. Otherwise, print the split parts.
Recommended print settings:

  • PLA

  • 205 °C nozzle

  • 60 °C bed

  • 10% cubic infill

I experimented with printing one part with a black top layer and another fully white to test translucency. After painting, there was no noticeable difference.

Installing Nuts

Insert M3 nuts into their cavities on the inner sides of the parts.
If your printer is properly calibrated, they should drop in easily. Gently shake the part so the nut sits flat.

The hole depth is designed so a 12 mm screw fully engages the nut without protruding through the front surface.

Assembly
  1. Loosely attach brackets to one side.

  2. The countersunk holes are angled to pull split parts tightly together when tightened.

  3. Sand the edges lightly to:

    • Flatten surfaces

    • Improve glue adhesion

Gluing
  • Apply contact adhesive to the middle sections and let it dry ~10 minutes.

  • Add small drops of CA glue near the edges.

  • Press parts together.

  • Place the assembly on a flat glass plate to ensure alignment.

  • Tighten all screws to clamp edges together.

  • Let cure for 24 hours.

Surface Preparation, Painting & Final Touches

Sand all surfaces (orbital sander + hand sanding).
Do not oversand — primer and paint will cover minor imperfections.

Protecting Translucent Areas

To keep logo areas translucent:

  1. Fill the logo cutouts with fine quartz sand (~300 µm).

  2. Tap gently to compact.

  3. Remove excess sand.

  4. Apply a light coat of adhesion promoter.

  5. Let dry.

  6. Add 2–3 additional light coats.

Coat decorative parts as well:

  • Adhesion promoter

  • Black base coat (adds depth)

  • Chrome-style high-reflective paint

Remove sand using a brush or compressed air.

Paint the baseplate in a weathered wood style (many tutorials available online).
I painted the OneBlade holder in a darker wood tone to highlight it.

After drying:

  • Attach holder with 6× 3×16 mm wood screws.

  • Glue decorative parts using CA glue.

Mounting to the wall works like hanging a picture.

That completes the basic version.

Optional Features

Adding Your Own Logo (Blender)
  1. Import the baseplate into Blender.

  2. Create or import a 3D model of your logo.

  3. Position and scale it inside the circular indentations.

  4. Select baseplate → select logo → apply Boolean modifier (Difference).

  5. Limit pocket depth to max 8 mm to maintain strength and light diffusion.

If multiple booleans cause surface issues:

  • Split the baseplate into separate parts

  • Cut logo pockets individually

  • Reassemble afterward

Adding Charging Dock Functionality

Before mounting the OneBlade holder:

  1. Feed the charging plug through the rear hole.

  2. Press the cable into the lower channel.

  3. Push the plug into the upper channel (large chamfers lock it in place).

  4. Route cable through the baseplate.

  5. Mount the holder.

Plug in USB power — and enjoy stylish charging.

Adding Logo Backlighting

This modification increases complexity.

  1. Print two backlight covers.

  2. Glue two 5V LEDs (from a strip) inside each cover.

  3. Route wires through slots.

  4. Wire LEDs in parallel with the OneBlade power supply.

Logos will illuminate with fixed brightness and color.

Never leave powered unattended.

Full Version – “Go Bonkers”

This is the most advanced configuration:

Features:

  • Charging dock

  • Addressable RGB LEDs (WS2812B)

  • Current/power monitoring (INA219)

  • WiFi connectivity (ESP8266)

  • MQTT reporting

  • Charging status indication via logo brightness

LED Setup

  1. Cut two WS2812B LEDs from a strip.

  2. Solder wires to 5V, GND, DI.

  3. Mount to backlight cover.

  4. Chain second strip from first strip’s output.

  5. Secure with hot glue.

PCB Build

On perfboard, solder:

  • 3.3V voltage regulator

  • ESP-01

  • INA219

  • USB port (for OneBlade)

  • Screw terminal for 5V input

Mount the board using the standoffs on the mid bracket.
Circuit diagram and some further instruction will be added asap. 

For advanced features, you will need:

  • A running MQTT broker

  • A database in your home infrastructure

Final Safety Reminder

For any electronic version: Unplug the system whenever you leave it unattended. Even small DIY electronics can cause serious damage if improperly built.

Tags