Lian Li A3 SFX PSU Mount and Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to mount an SFX PSU to the side of the Lian Li A3 and an accompanying shroud to aid in cable management
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 66
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing
I printed with 3 walls and 10% infill. Avoid PLA because of its poor heat resistance and avoid CF filaments as they have some electrical conductivity.
Installation
Mount the PSU to the bracket, plug in the power cable extension into the PSU, then mount the bracket to the case frame. You may need to use a bit of force when driving the countersunk screws to get the head of the screw past the initial tightness of the screw holes. Install and/or route your PSU cables, then slide the shroud onto the bracket.
Versions
There are two versions of the shroud:
The straight version has the bottom part of the shroud going straight across horizontally, and it's what I recommend for most people.
The pocket version has an extra pocket of space (which I needed for an Aquacomputer Quadro) but it gives the bottom of the shroud a bit of an odd shape and takes space that may otherwise be needed for long GPUs (see photo.)