Top Mount Lever Stop - Filament Cutter for Ender 3 V3 SE/KE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top mounted replacement lever stop for Ender 3 V3 SE filament cutter
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
2/26/2026
Original model and upload
2/27/2026
Updated to include changes to the cutter macro for the Pico MMU
Updated files to include longer versions that come down 4mm lower. The lever hits just fine on the originals, but it's pretty close to the bottom so I made them longer and uploaded the .stl and .step files. Originals still included.
What and Why?
In adding a Pico MMU to my Ender 3 V3 SE, I needed a filament cutter and the one by @matarsaed (https://www.printables.com/model/1243521-filament-cutter-for-ender-3-v3-seke) fit the bill. The only thing I wasn't super excited about was losing 10-15mm of print area along the entire right side of the build plate for the entire volume of the printer.
While the original model did include a servo-based filament stop...I'd been building this MMU for almost 2 months and frankly I was tired of ordering and waiting for one-off pieces to show up. And I didn't want even more wires in the mix. So, I looked for some options and took inspiration from the model by @cedbossneo (https://www.printables.com/model/1126928-filament-cutter-for-ender-3-v3-se) that had the lever actuator mounted at the top of the gantry (completely different style of cutter). I did not remix any of the top mounted actuator/stop, but want to give credit for the general idea where it is due.
I moved the stop to the top of the gantry, with the stop positioned in the same location it would be if it were attached to the X axis (and Z=250), and regained use of all but the top 10-11mm of the entire right side of the build plate.
Printing & Post-Processing
Material: PLA should be fine for the lever stop
Layer Height: 0.2 mm
Infill: 15% (Gyroid)
Supports: None needed as long as you are reasonably decently calibrated. The overhang was specifically angled to not need supports on either version
Orientation: Print orientation is correct in the .stl files
Print Time: Mine printed in a little over an hour and a half
Post-Processing: None should be necessary
Assembly
Remove the 3 machine screws on the top-right of the gantry, align the lever stop, and attach with the original screws.
Usage
You will have to update your cutter code to raise to Z=250 and return to the original height rather than whatever it is doing now. Below is the code that I implemented specific to the Pico MMU. That said, YMMV, caveat emptor, do your own research, I'm not responsible for failed prints, etc.
In sp_mmu.cfg, modify the _SP_TIP_FORM macro to include one extra G0 command as follows:
G0 {clear_move} F{60*approach_speed} ## Approach clear position## Add the following line to raise the print head to 250G0 Z250 ## Raise to Z 250 after ensuring the lever is clear of lever stopG0 E-{fil_cut_position} F{60*filament_retract_speed} ## Retract filament close to the cutter bladeG0 {cut_move} F{60*cut_speed} ## Move to cutG0 {clear_move} F{60*cut_speed} ## Move back to clear position
That's all that should be required
Notes
This was created with Fusion (Personal Edition) and while I do have the .f3d files...I'm embarrassed with how bad I am at optimizing the work flow so I'm not sharing those at this time. I'm not opposed to it, I'm literally just embarrassed by them. If enough people ask, I'll add those as well.
As a compromise, because I personally REALLY appreciate when a model designer includes something other than a mesh, I've included step files if you want to tinker.