Gloryhammer HueForge RTTKOF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glow in the dark HueForge model for the album Return to the Kingdom of Fife by Gloryhammer
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Glow-in-the-dark HueForge print of the RTTKOF album artwork. I used Overture Black and Glow Green PLA, but it should work with any dark and glow filaments. If you plan on scaling the model, make sure to only scale on X and Y. Z must remain constant.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
#000000 PLA Overture Black Transmission Distance: 0.1
#ebf1e0 PLA Overture Glow Green Transmission Distance: 10
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Glow Green for the rest.