1 / 2
120mm Fan Mount - for solder fume extraction — image 1
1 / 2

120mm Fan Mount - for solder fume extraction

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple, compact solder fume extractor mount designed around a 120mm fan. Nothing fancy — it just works.

Rating
0 / 5
Likes
7
Downloads
10
Makes
0
Views
129
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Compatibility: Any 120mm fan with 105mm mounting hole spacing should fit. I'm using a Noctua NF-F12 industrialPPC-3000 PWM, but you're not locked into that. The fan mounts to the baseplate using two thick self-tapping screws that cut directly into the mounting holes — no nuts or threaded inserts needed on the fan side. Next to the fan sits a small enclosure for a motor speed controller


What it does: Pulls solder fumes away from your face. In my setup, it sits near the workbench and exhausts through a window. Simple, effective, quiet enough even at full blast (well, as quiet as 3000 RPM gets).


What you need:
- 120mm fan (105mm mounting hole pattern) — I use a Noctua NF-F12 industrialPPC-3000
- BOJACK 1803BK speed controller (or similar DC PWM dimmer)
- 2x M2 threaded inserts (for the dimmer enclosure)
- 2x thick self-tapping screws (for fan mounting, included in the Fan package)
- 12V power supply (I recycled an old one I had lying around) 
- Strain relief for the 12V cable (available at any hardware store)


What's missing (by design):
- No strain relief mount — grab one from your local hardware store, they come in various sizes
- No built-in filter — this is a fume redirector, not a filter. Point it at a window.


Print settings: Tested with ASA on a Prusa Core One, 0.4mm nozzle, no supports needed, but if you want cleaner holes: the standard organic supports work.


My first upload — enjoy! Feedback welcome.

Tags