10 Inch Rack Mount for Raspberry Pi Compute Module 5 IO Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10 inch rack mount for Raspberry Pi Computer Module 5 IO Case
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Utilizing WebMaka's Cagemaker PRCG, I designed this 10" Rack Mount for a Raspberry Pi Computer Module 5 IO Case (170mm x 28mm x 94mm). The OpenSCAD used in this project is based on Version 0.4 of the Cagemaker PRCG. I originally found this model on Thingiverse.
I've included the OpenSCAD (rpicm5_io_case.scad), the STL generated from the OpenSCAD (rpicm5_io_case.stl), and a split of the faceplate and the cage into separate STL files for smaller printers (rpicm5_io_case_front.stl and rpicm5_io_case_cage.stl, respectively).
Print Settings
Brim: Enabled (For Cage Only)
Supports: Support on build plate only (For Cage Only)
Infill: 15%