Wood Crutche Tip (22mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple tip/foot for wood crutches that goes from square to circle.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 21
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
A few weeks ago, I sprained my ankle quite badly and needed crutches for a few days. I remembered that I had an old pair somewhere and great news, they're still in great shape... except for the tips/feet. They were so hardened that they had no grip on the ground.
I couldn't find any replacement or any existing model that seemed a good fit, so I made this one.
Bottom is a circle that transition to a square. Circle diameter is 22.5mm and square diagonal is a little under 32mm.
I don't remember the exact settings I used, but I know that I increased walls, layers and infills to give them so strength. Printed without support on my Bambu P1S, 0.4mm nozzle and Overture 95A TPU that I had on hand.