Panduit MP75 Label Maker Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Draft-level hard case for listed label printer so that consumables stay with the printer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I designed this hardcase to keep this oddball (to me) printer together with its label and printable shrink tube consumables. A compartment is also provided for the 6xAA batteries as a prompt for me to remove them before storage. This model is tagged as incomplete because the included latching tabs for the lid were an utter failure-I just cut them off (visible in photos) and used the case as-is (good enough). If I were to print another I would:
Redesign the locking tabs, or swap them out for a deeper overlap between the case and lid (friction fit).
Give the lid another 5mm of clearance for the cartridges (I mis-measured).
Resize the battery compartment to prevent tumbling and potential shorting/discharge.
Thoroughly clean nozzle for the first layer (the dark blemishes) and/or swap the text and background colors.
Note to future self: The text was added in Prusa Slicer via the Right-Click->Add modifier feature, then adding an extruder for the second color.
I am posting this model, and its Fusion360 origins, on the off chance someone could use this as a starting point for their own case.