A320 Style Parametric Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flly parametric airbus A320 style covers to cover any missing panels.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 121
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 12/06-2026: Added new parameters [fillet_radius] & [Screw_hole_from_side] and new files/pictures with fillet on edges to match with other panels.
A fully parametric model to cover up any panels that you might not have yet or any empty spaces. There are two variants, one with two holes and one hole. Open in Fusion 360 and click on modify->change parameters to see all parameters. Then just export, slice and print!
Parameters:
Total_Thickness: The total thickness, default 9
Panel_Width: The width of the panel, from one screw to the other.
Panel_Height: The height/depth of the panel. The amount you want covered up.
Screw_Hole_depth: The depth were the screw hole/mount starts from the bottom edge, default 3
Outer_Fillets: Fillet radius on the four outer corners, default 2
Screw_Hole_Fillets: Fillet radius for the screw hole slot, default 2
Hole_from_edge: only applicable for the double hole. The distance from the edge to the screw hole, default 20
fillet_radius: radius of the fillet edge on the outer corners and edges, default 1
Screw_hole_from_side: The distance from the side edges to the center of the screw hole, default 5