1 / 3
max Team Licence Plates (Pennsylvania) Upgrade for 3D SETS Model 14 (Max Team) — image 1
1 / 3

max Team Licence Plates (Pennsylvania) Upgrade for 3D SETS Model 14 (Max Team)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Special request from @JohnNash_4366283

Rating
5 / 5
Likes
3
Downloads
13
Makes
1
Views
85
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Warning

None.

Definition

None.

Printing

Is required the same printer size than 3D SETS has defined.

Use the same setting than 3D SETS Licence Plates for the modified License Plates (0.2mm for the first layer and for the following 0.15mm).

A 0.25mm or less nozzle is recommanded.

See below to change color setting according the parts :

Pennsylvania Front - S967238-Change Color-614000911

Black/Chrome+Orange after 3,2mm+Black/Chrome after 3,65mm

Pennsylvania Rear - S967238-Change Color-614000A11

Black/Chrome+Orange after 1,85mm+Black/Chrome after 2,3mm

Pennsylvania Front - A-Team-Change Color-614000B11

Black/Chrome+Orange after 3,2mm+Black/Chrome after 3,65mm

Pennsylvania Rear - A-Team-Change Color-614000C11

Black/Chrome+Orange after 1,85mm+Black/Chrome after 2,3mm

Pennsylvania Front - M14BE3D-Change Color-614000D11

Black/Chrome+Orange after 3,2mm+Black/Chrome after 3,65mm

Pennsylvania Rear - M14BE3D-Change Color-614000E11

Black/Chrome+Orange after 1,85mm+Black/Chrome after 2,3mm

After 2mm means that the 2mm is not including.

Build

None

Feedback

It is welcome.

Remark

None.

Version

v1/v20260228 1st upload.

Tags